CHAPTER 2 FRONT PANEL SETUP MENU
This menu has three selections
1.Press the [Menu] button to display the configuration menu.
2.Select LAN.
3.Press [5] [1].
4.Press ! or " to select ON or OFF.
5.Press [Set] to accept the selection.
6.Press [Stop/Exit] to exit the configuration menu.
RELAY BROADCAST
This function allows the FAX/MFC to receive a document over the Internet, and then relay it to other fax machines through conventional analog landlines.
1.Press the [Menu] button to display the configuration menu.
2.Select LAN.
3.Press [5] [2].
4.Press ! or " to select the Relay Domain (01 – 10).
5.Press [Set] to accept the selection.
6.Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
7.Press [Set] to accept the selection.
8.Press [Stop/Exit] to exit the configuration menu.
RELAY DOMAIN
You can register the Domain Names (Max.10) that are allowed to request a Relay Broadcast.
1.Press the [Menu] button to display the configuration menu.
2.Select LAN.
3.Press [5] [3].
4.Press ! or " to select ON or OFF.
5.Press [Set] to accept the selection.
6.Press [Stop/Exit] to exit the configuration menu.
Relay Broadcast Report can be printed at the FAX/MFC used as the Relay Station for all Relay Broadcasts. Also, when the FAX/MFC is used with the Brother Network PC Fax software the FAX/MFC is acting as a Relay Station for fax transmissions from the network so a Relay Report can also be printed for confirmation of sent network faxes.
Its primary function is to print reports of Relay Broadcasts from external sources through the FAX/MFC. Please note that this is not possible without the consent of the Relaying Station as permission in the form of Relay Domain has to be given to external parties.