CHAPTER 4 INTERNET FAX

Sending an Internet Fax

•Send the Internet Fax in the same way to send a fax.

If you have already programmed the addresses of the Internet Fax addresses into the FAX/MFC as a One Touch or Speed Dial, you can send the Internet Fax in the same way as you would send a normal fax.

You can select your preferred resolution by selecting the Fax Resolution key on the panel before sending the Internet Fax. But you cannot send the color document.

•Send the Internet Fax with the Scan to E-mail button (only for the models with the Scan to keys).

1.Set the document that you wish to send in the auto feeder of the Brother FAX/MFC.

2.Press the Scan to E-mail button on the control panel of the FAX/MFC. The display will then alternate between

-Connect to PC

-Connect to LAN

Select the number for your preferred connection and press the “Set” key. A submenu appears on the LCD so you can select the resolution and the scan to format. Use the arrows keys to scroll through the options.

1.

B/W STD

(200x100dpi Black and White)

2.

B/W FINE

(200x200dpi Black and White)

3.

COLOR STD

(150x150dpi Color)

4.

COLOR FINE

(300x300dpi Color)

5.

COLOR S.FINE

(600x600dpi Color)

*Options 3-5 are only available for the color models. You cannot set the resolution set by the Fax Resolution key. Step 1 and 2 are sent in TIFF-F format and options 3-5 are sent in JPEG format.

Select the number for your preferred resolution and format and press the “Set” key.

If you have already programmed this information into the FAX/MFC as a One Touch

or Speed Dial, simply select the appropriate Dial location and press “Fax Start”.

To manually enter the address, continue to the following step.

4-3