Power Supply

Battery

1After making sure that the power is off, remove the battery compartment cover on the back of the machine. If the batteries are already in the machine, remove them.

Make sure that the power is turned off when replacing batteries.

2Insert eight new AA-size alkaline batteries (LR6), making sure that the positive (+) and negative (-) ends of the batteries match the positive (+) and negative (-) marks inside the battery compartment.

Always replace all eight batteries at the same time using brand new ones.

z GETTING STARTED

3Attach the battery compartment cover by inserting

the three hooks at the bottom into the slots on the machine, then pushing down firmly until it snaps into place.

• Remove the batteries if you do not intend to use the P-touch labeler for an extended period of time.

When power is disconnected for more than two minutes, all text and format settings will be cleared. Any text files stored in the memory and clock settings will also be cleared.

1

2

3

4

5

6

7

8

9

Power Supply

16

Page 23
Image 23
Brother PT2730VP, PT-2730 manual Power Supply, Battery