USING THE FILE MEMORY
You can store up to 99 of your most frequently used labels in the file memory. Each label is stored as a file, allowing you to quickly and easily recall your label when needed again.
• When the file memory is full, each time you save a file you will need to overwrite one of your stored files.
Storing a Label into Memory
1After entering the text and formatting the label, press the File key to display the File screen.
2Select "Save" using the 
or 
key.
3Press the OK or Enter key. A file number is displayed.
A label text is also displayed if a label is already stored in that file number.
4Select a file number using the 
or 
key, and then press the OK or Enter key to save the label under the selected file number.
The file is saved and the screen returns to the text entry screen.
When there is already a stored file in the selected number, the data will be overwritten by the file you try to save.
• Press the Escape key to return to the previous step.
• A maximum of 280 characters can be saved in each file. However, this number may depend upon the characters or symbols used. Up to 99 files can be saved.
•To store a label created by using the
Opening a Stored Label File
1Press the File key to display the File screen.
2Select "Open" using the 
or 
key.
3Press the OK or Enter key. The file number of a stored label is displayed. The label text is also displayed to identify the label.
4Select a file number using the 
or 
key, and then press the OK or Enter key to open the selected file. The file is opened and displayed on the text entry screen.
Press the Escape key to return to the previous step.
Storing a Label into Memory
z USING THE FILE MEMORY
1
2
3
4
5
6
7
8
9
68 |
