Configuring your machine for a wireless network (For
Confirm your network environment
Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)
1 | 3 |
| |
4 |
|
| 2 |
3 |
|
1WLAN access point/Router 1
1If your computer supports Intel® MWT (My WiFi Technology), you can use your computer as a WPS
2Wireless network machine (your machine)
3Wireless capable computer connected to the WLAN access point/router
4Wired computer which is not wireless capable connected to the WLAN access point/router with a network cable
Configuration method
The following instructions will offer four methods for configuring your Brother machine in a wireless network environment. Choose the method you prefer for your environment.
Wireless configuration temporarily using a USB cable (Recommended)
See Wireless configuration temporarily using a USB cable (Recommended for Windows®) uu page 12.
Wireless configuration using the Setup Wizard from the control panel
See Configuration using the machine’s control panel Setup Wizard uu page 17.
One push wireless configuration using WPS
See One push configuration using WPS
PIN Method wireless configuration using WPS
See Configuration using the PIN Method of WPS
10