Release Go. Make sure that all the LEDs turn off.
Turn off the machine.
Make sure that the front cover is closed and the power cord is plugged in.

Control panel setup

Reset the network settings to the factory default

You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information).

Note

This function resets all wired and wireless network settings to the factory default.

You can also reset the print server back to its factory default settings using the BRAdmin applications or Web Based Management. (For more information, see Other Management Utilities uu page 7.)

4

For HL-5450DN(T)

a b

c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and then the Ready LED turns off.

d

e Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The machine will restart.

For HL-5470DW(T) and HL-6180DW(T)

a Press a or b to choose Network. Press OK.

b Press a or b to choose Network Reset. Press OK.

c d

Press a to choose Yes for reboot.

The machine will re-start.

40