Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))

One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™

You can use WPS or AOSS™ from the control panel menu to configure your wireless network settings if your WLAN access point/router (A) supports either WPS (PBC 1) or AOSS™.

3

1Push Button Configuration

Important

If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you proceed with this installation.

If you have previously configured the wireless settings of the machine, you must reset the LAN settings before you can configure the wireless settings again.

To reset the LAN settings, see Reset the network settings to the factory default uu page 40.

a Press a or b to choose Network. Press OK.

b Press a or b to choose WLAN. Press OK.

c Press a or b to choose WPS/AOSS. Press OK.

27