Web Based Management

How to configure the SNTP protocol using Web Based Management

SNTP is the protocol used to synchronize the time used by the machine for authentication with the SNTP time server.

a Click Network, and then click Protocol.

b Select the SNTP check box to activate the setting.

c Click Advanced Setting.

Status

5

Displays whether the SNTP server settings are enabled or disabled.

 

SNTP Server Method Choose AUTO or STATIC.

•AUTO

If you have a DHCP server in your network, the SNTP server will automatically obtain the address from that server.

•STATIC

Enter the address you want to use.

Primary SNTP Server Address, Secondary SNTP Server Address Enter the server address (up to 64 characters).

The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the Primary server is unavailable, the machine will contact the Secondary SNTP server. If you have a primary SNTP server, but no secondary SNTP server, simply leave this field blank.

Primary SNTP Server Port, Secondary SNTP Server Port Enter the Port number (1 to 65535).

The Secondary SNTP server port is used as a backup to the Primary SNTP server port. If the Primary port is unavailable, the machine will contact the Secondary SNTP port. If you have a primary SNTP port, but no secondary SNTP port, simply leave this field blank.

51