Brother Multi-Protocol On-board Ethernet Print Server and Wireless Ethernet, Version 0 ENG 4 Control panel setup

4 Control panel setup

Overview

HL-5450DN(T) have six LEDs (Back Cover, Toner, Drum, Paper, Error and Ready) and two keys (Cancel and Go) on the control panel.

HL-5470DW(T) and HL-6180DW(T) one back lit Liquid Crystal Display (LCD), seven keys and two Light Emitting Diodes (LEDs) on the control panel. The LCD is a 16 character single line display.

With the control panel you can do the following:

Change the print server settings using the control panel (For HL-5470DW(T) and HL-6180DW(T))

See Network menu (For HL-5470DW(T) and HL-6180DW(T))uu page 36.

Reset the network settings to the factory default

See Reset the network settings to the factory default uu page 40.

Print the Printer Settings Page (For HL-5450DN(T)) or Network Configuration Report (For HL-5470DW(T) and HL-6180DW(T))

See Printing the Printer Settings Page (For HL-5450DN(T))uu page 41.

See Printing the Network Configuration Report (For HL-5470DW(T) and HL-6180DW(T))uu page 41.

Printing the WLAN report (For HL-5470DW(T) and HL-6180DW(T))

See Printing the WLAN report (For HL-5470DW(T) and HL-6180DW(T))uu page 42.