Control panel setup

Printing the Printer Settings Page (For HL-5450DN(T))

Note

Node name: The Node name appears on the Network Configuration Report. The default node name is “BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)

The Printer Settings Page prints a report listing all the current printer settings including the network print server settings.

You can print the Printer Settings Page using Go of the machine.

4

a Make sure that the front cover is closed and the power cord is plugged in.

b Turn on the machine and wait until the machine is in the Ready state.

c Press Go three times within 2 seconds. The machine will print the current Printer Settings Page.

Printing the Network Configuration Report

(For HL-5470DW(T) and HL-6180DW(T))

Note

Node name: The Node name appears on the Network Configuration Report. The default node name is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)

The Network Configuration Report prints a report listing all the current network configuration including the network print server settings.

a Press a or b to choose Machine Info.. Press OK.

b Press a or b to choose Print NetSetting. Press OK.

Note

If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.

41