Control panel setup
Channel
This field displays the current wireless network channel.
Speed
This field displays the current wireless network speed.
SSID
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID | 4 |
name. |
Comm. Mode
This field displays the current wireless network communication mode.
MAC Address
The MAC address is a unique number assigned for the machine’s network interface. You can check your machine’s MAC address from the control panel.
Set to Default
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want to reset both wired and wireless settings, see Reset the network settings to the factory default uu page 40.
Wired Enable
If you want to use the wired network connection, set Wired Enable to On.
WLAN Enable
If you want to use the wireless network connection, set WLAN Enable to On.
Note
If a network cable is connected to your machine, set Wired Enable to Off.
39