START-UP CHECKLIST

(Remove and Store in Job File)

I. PRELIMINARY INFORMATION

 

MODEL NO.: _______________________________________

TECHNICIAN: _________________________________________

DATE: _____________________________________________

BUILDING LOCATION: ________________________________

SERIAL NO. _______________________________________

 

II. PRE-START-UP (insert checkmark in box as each item is completed)

REMOVE COMPRESSOR TIEDOWN BANDS (SIZES 103,121,150,151 ONLY) PER INSTALLATION INSTRUCTIONS

VERIFY THAT CONDENSATE CONNECTION IS INSTALLED AS SHOWN IN THE INSTALLATION INSTRUCTIONS

CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS

CHECK THAT INDOOR AIR FILTERS ARE CLEAN AND IN PLACE

VERIFY THAT UNIT INSTALLATION IS LEVEL WITHIN TOLERANCES LISTED IN THE

INSTALLATION INSTRUCTIONS

CHECK FAN WHEEL AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESS CHECK PULLEY ALIGNMENT AND BELT TENSION; REFER TO INSTALLATION INSTRUCTIONS

￿VERIFY INSTALLATION OF ECONOMI$ER IV HOOD (IF EQUIPPED)

CUT ALONG DOTTED LINE

III. START-UP

 

 

 

 

 

ELECTRICAL

 

 

 

 

 

SUPPLY VOLTAGE

L1-L2

 

L2-L3

 

L3-L1

CIRCUIT NO. 1 COMPRESSOR AMPS

L1

 

L2

 

L3

CIRCUIT NO. 2 COMPRESSOR AMPS

L1

 

L2

 

L3

INDOOR FAN AMPS

L1

 

L2

 

L3

TEMPERATURES

 

BOTH CIRCUITS OPERATING

OUTDOOR-AIR TEMPERATURE

 

DB

 

 

RETURN-AIR TEMPERATURE

 

DB

 

WB

COOLING SUPPLY AIR

 

DB

 

WB

REFRIGERANT

 

 

 

 

 

CIRCUIT NO. 1

CIRCUIT NO. 2

REFRIGERANT SUCTION

 

PSIG

 

PSIG

REFRIGERANT TEMPERATURE SUCTION

 

F

 

F

REFRIGERANT LIQUID LINE

 

PSIG

 

PSIG

REFRIGERANT TEMPERATURE LIQUID LINE

 

F

 

F

VERIFY REFRIGERANT CHARGE USING COOLING CHARGING CHARTS ON PAGES 58-61

￿(COOLING MODE ONLY)

VERIFY 3-PHASE SCROLL COMPRESSOR IS ROTATING IN THE CORRECT DIRECTION

GENERAL

VERIFY ECONOMI$ER IV MINIMUM VENT POSITION AND CHANGEOVER SETTINGS ARE CONFIGURED TO JOB REQUIREMENTS (IF EQUIPPED)

CUT ALONG DOTTED LINE

Copyright 2005 Bryant Heating & Cooling Systems

Printed in U.S.A.

CL-1

CATALOG NO. 04-53558002-01

Page 70
Image 70
Bryant 558F START-UP Checklist, Preliminary Information, III. START-UP Electrical, Temperatures, Refrigerant, General

558F specifications

The Bryant 558F is a highly efficient and versatile gas furnace designed to provide reliable heating for residential spaces. Known for its exceptional performance and advanced technology, the 558F caters to homeowners looking for comfort, efficiency, and sustainability in their heating solutions.

One of the primary features of the Bryant 558F is its two-stage heating capability. This system allows the furnace to operate at different levels of output, optimizing energy consumption based on the heating demands of the home. By operating at a lower stage most of the time, the 558F can maintain consistent indoor temperatures while using less energy, leading to reduced utility bills.

The furnace is also equipped with aVariable Speed ECM blower motor. This feature provides enhanced air distribution and comfort by allowing for more precise control over airflow. The variable speed operation ensures that the furnace can adjust to the heating needs of the space without the constant on-off cycling, promoting quieter operation and better efficiency.

In terms of efficiency ratings, the Bryant 558F boasts an impressive Annual Fuel Utilization Efficiency (AFUE) rating of up to 96%. This high rating indicates that the furnace converts a significant portion of its fuel into usable heat, making it an environmentally friendly choice. With lower greenhouse gas emissions, homeowners not only benefit from cost savings but also contribute to reducing their carbon footprint.

Additionally, the furnace incorporates advanced combustion technology, including a durable heat exchanger designed for longevity and efficiency. This component is vital for maximizing heat transfer while minimizing heat loss, contributing to the overall performance of the unit.

The Bryant 558F is compatible with the manufacturer's Infinity System control, providing homeowners with a user-friendly interface to manage their heating system effectively. This compatibility allows for the integration of smart home technology, enabling remote access and programmable settings for added convenience.

Installation and maintenance of the Bryant 558F are straightforward, thanks to its compact design and thoughtful layout. Homeowners can find peace of mind knowing that service and upkeep are manageable, prolonging the life of the furnace.

In summary, the Bryant 558F gas furnace combines efficiency, advanced technology, and reliability to provide exceptional indoor comfort. With its two-stage heating, variable speed blower motor, and high AFUE rating, the 558F stands out as an optimal heating solution for modern homes seeking both performance and sustainability.