PROGRAMMING THE BREWER (cont.)
SET NEW RECIPE (cont.)
8.Using
9.When finished, press another batch size and re- peat step 8 for that size. Continue setting all batch sizes.
10.When finished setting all batch sizes, press and release DONE. The display should read 3 BATCH
SIZES DONE?
11.If the three batch sizes are not correct, press and release NO to return to the BREW OUNCES setup screen and repeat steps 8 through 10. If the three batch sizes are correct, press YES. This will advance to the % BYPASS function. (Refer to % BYPASS for description).
% BYPASS XX.X | ||
DONE | (+) | |
3 BATCHES DONE? | ||
NO |
| YES |
SET PULSE BREW?
NO YES
P2416
12.Using
13.When finished, press another batch size and repeat step 12 for each batch to be set.
14.When finished setting each batch size, press DONE. The display should read 3 BATCHES DONE?
15.If the three batch sizes are not correct, press and release NO to return to the % BYPASS setup screen and repeat steps 12 through 15. If they are correct, press YES. This will advance to SET PULSE BREW. (Refer to SET PULSE BREW for description).
16.To SET PULSE BREW, if setting pulse brew BY EXAMPLE (brewing into a funnel) press YES and proceed with the setup instructions for SETTING PULSE BREW - BY EXAMPLE.
17.If setting pulse brew by ENTER TIMES (enter- ing known times) press NO. The display should read ENTER TIMES. Press and release YES and
Page 17
proceed with the setup instructions for SETTING PULSE BREW - ENTER TIMES. SET DRIP TIME. (Refer to SET DRIP TIME for description). After SET PULSE BREW has been accomplished, the next function will be SET PREINFUSION. (Refer to SET PREINFUSION function for description.
SET PREINFUSION?
NO |
| YES |
ADVANCES |
|
|
TO NEXT |
|
|
FUNCTION |
|
|
ON TIME X:XX | ||
DONE | (+) | |
OFF TIME X:XX | ||
DONE | (+) | |
ON |
| OFF |
X:XX |
| X:XX |
| 5 SEC. DELAY |
|
3 BATCHES DONE? | ||
NO |
| YES |
DRIP TIME X:XX | ||
DONE | (+) | |
41343 080108
