Bunn 41343 manual Done, PROGRAMMING THE BREWER cont, SET NEW RECIPE cont

PROGRAMMING THE BREWER (cont.)

SET NEW RECIPE (cont.)

24.When finished setting all batch sizes, press DONE. The display will show the ON and OFF TIMES that were entered for a particular batch size. After a 5 second delay, the display should read 3 BATCHES

DONE.

25.If the three batches are not complete, press NO in order to return to SET PREINFUSION, and repeat steps 19 through 24.

26.If the three batches are correct, press YES. This will advance to the next function, SET DRIP TIME. (Refer to page 31 for description of SET DRIP TIME function.)

DRIP TIME X:XX

(-) DONE (+)

3 BATCHES DONE?

NO YES

(COFFEE NAME)

SETUP COMPLETE

P2418

being programmed (modified) along with SETUP COMPLETE.

33.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

27.The display should now read DRIP TIME, along with either the word OFF, or a time will be showing. A batch light should also be blinking.

28.Using (-)and (+), set the amount of time from when the brew spray ends to when the funnel is emptied of hot liquid for that batch size.

NOTE: Set to OFF to prevent funnel locks from engaging (to disable this function), for a particular batch size. To set to OFF, continue to press and release (-)until OFF appears on the screen.

29. When finished, press another batch size and repeat step 28 until all three sizes are set.

30. When finished setting all batch sizes press DONE. The display should read 3 BATCHES DONE?.

31. If the three batch sizes are not correct, press NO to return to the DRIP TIME setup screen and repeat steps 28 through 30.

32. If the three batch sizes are correct, press YES. The screen should show the name of the coffee

Page 18 41343 080108