PROGRAMMING FUNCTIONS - (cont.)

DRIP TIME (now displayed on "non" funnel lock

 

 

12. When finished, press another batch size and repeat

units as well)

 

 

step 11 until all three sizes are set.

 

This function allows the setting or modification

 

 

13. When finished, press DONE. The display should

of the funnel locks to stay engaged after the end of a

 

 

read 3 BATCHES DONE?

 

 

 

 

 

 

 

 

 

 

brew cycle. This ensures the funnel cannot be removed

 

 

14. If the three batch sizes are set correctly, press YES.

until after the liquid has emptied out of the funnel.

 

 

The screen should show the name of the coffee

Procedure to modify drip times:

 

 

flavor being programmed (modified) along with

 

 

SETUP COMPLETE.

 

 

 

 

 

 

 

 

 

 

Range: OFF to 10 minutes for all three batch sizes.

 

 

15. After a 5 second delay, the display will advance to

NOTE: If the brewer is already in the DRIP TIMES

 

 

the next coffee name in the brewer's memory. If

 

 

no other coffee names are present, the display will

screen, it is not necessary to follow steps 1 through

 

 

 

 

read THAT WAS THE LAST RECIPE, and return to

10 in this section, but proceed directly to step 11.

 

 

 

 

the REVIEW RECIPES screen.

 

 

 

 

1. Press and hold the upper right hidden switch until

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the display reads UNITS. Release the switch. Press

 

 

 

 

 

REVIEW RECIPES?

 

and release switch until the display reads REVIEW

 

 

 

 

 

 

RECIPES.

 

 

 

 

 

NO

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Press YES to proceed. The display should now

 

 

EXIT TO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

read:

 

NEXT FUNCTION

 

 

 

 

SINGLE

 

 

 

 

 

 

 

 

 

 

 

NO NAME, along with MODIFY, SHOW and NEXT

 

 

SCREEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BREWERS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DUAL

 

 

 

(SINGLE brewers)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO-NAME

 

 

 

 

BREWERS

 

 

 

NO-NAME LEFT, along with MODIFY, SHOW and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODIFY SHOW NEXT

 

 

 

 

 

 

 

 

 

 

 

NEXT (DUAL brewers).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO-NAME LEFT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Press and release NEXT to advance to the desired

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODIFY SHOW NEXT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

coffee name to be modified.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.

Press and release MODIFY. The display should

 

SCREEN DISPLAYED

 

PRESS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

read BREW OZ.

 

BREW OZ: XX.XX

 

DONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 BATCHES DONE?

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

Press and release DONE. The display should read

 

% BYPASS XX.X

 

DONE

 

 

 

 

 

 

 

 

ADVANCES TO ALL OTHER

 

 

3 BATCHES DONE?.

 

3 BATCHES DONE?

 

YES

 

 

 

COFFEE NAMES PROGRAMMED

 

 

 

SET PULSE BREW?

 

NO

 

 

 

 

 

 

 

 

6. Press and release YES. The display should now

 

 

 

 

 

IN THE BREWER"S MEMORY

 

 

SET PREINFUSION?

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

read % BYPASS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.

Press and release DONE. The display should read

 

 

DRIP TIME XX.X

 

 

 

 

 

(COFFEE NAME)

 

3 BATCHES DONE?.

 

 

 

MODIFY SHOW NEXT

 

 

 

(-) DONE

(+)

 

 

 

 

 

 

 

 

 

8. Press and release YES. The display should now

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

read SET PULSE BREW.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9.

Press and release NO. The display should now

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHEN THE LAST COFFEE

 

 

read SET PREINFUSION.

 

 

3 BATCHES DONE?

NAME IN BREWER'S MEMORY

 

10. Press and release NO. The display should now read

 

 

NO

 

YES

IS DISPLAYED, PRESSING

 

 

 

 

NEXT WILL EXIT AND THE

 

 

DRIP TIME, along with either the word OFF, or a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY WILL THEN READ:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

time will be showing. A batch light should also be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

blinking.

 

 

COFFEE NAME

 

 

 

 

 

 

 

 

 

 

11. Using the (-)and (+), set the amount of time from

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETUP COMPLETE

 

 

 

 

 

 

 

 

 

 

 

when the brew solenoid shuts off to when drip-out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THAT WAS THE

 

occurs for that batch size.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAST RECIPE

 

 

 

 

EXITS TO THE NEXT COF-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Set to OFF to prevent funnel locks from engag-

 

 

FEE NAME IN BREWER'S

 

 

 

 

 

 

 

 

 

 

 

 

 

MEMORY. IF NO OTHER COF-

 

 

 

 

 

 

 

 

 

 

 

ing (to disable this function), for a particular batch

 

 

FEE NAMES ARE ENTERED IN

 

 

 

 

 

 

 

 

 

 

 

size. To set to OFF, press and release (-)until OFF is

 

 

THE BREWER"S MEMORY, THE

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY WILL THEN READ:

 

 

 

 

 

 

 

 

 

 

 

displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 29

 

 

 

 

 

 

 

 

 

 

 

41343 080108

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 29
Image 29
Bunn 41343 manual Units as well, Procedure to modify drip times, Setup Complete, Review Recipes screen, Read Brew OZ

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.