Bunn 41343 Set Pulse Brew - By Example, Procedure to set pulse brew by example, Container Ready?

Page 26

PROGRAMMING FUNCTIONS - (cont.)

SET PULSE BREW - BY EXAMPLE

This function allows adjustment of the pulse brew by first observing the flow of water for on and off times.

Procedure to set pulse brew by example:

NOTE: The procedure to enter the Pulse Brew Function (Page 21) must be performed prior to following the steps listed below.

1.Press and release YES. The display should now read SET BY EXAMPLE.

2.Press and release YES. The display will read

CONTAINER READY?

Place a container under the sprayhead. Place a brew funnel containing a filter and grounds on top of the container so that the spray and coffee bed can be viewed. (See Fig. 1)

3.Choose the batch size to be set by pressing the pad next to the indicator light on the brew side. The batch size indicator selected will be flashing.

4.If everything is in place, press YES in the CON- TAINER READY? screen. The display will read PRESS BREW TO SET 1st ON-TIME.

5.Press and release the BREW switch. The brew water will start to flow into the funnel and the water level will rise.

6.Watch the flow of water. When it reaches the desired level in the funnel, press and release the BREW switch again to end the 1ST ON TIME.

7.The spray will stop and the brew funnel will start to empty. When the water level in the funnel drains to the desired level, press BREW switch again to end the OFF-TIME. This also begins the spray of water for the final setting.

8.The brew water will begin again and the water level in the funnel will rise. Watch the flow of water. When it reaches the desired level, press the BREW switch to end the LAST ON TIME.(e)

9.The display should now show the 1st, off and last times for the batch size just programmed. After a 5 second delay, the display will read 3 BATCHES

DONE?

10.When finished press YES in 3 BATCHES DONE? The display will then read SET PREINFUSION.

11.Press and release the ON/OFF switch (either on DUAL brewers)located on the front switch panel to exit the UNITS function and return to the MAIN

SCREEN.

P2288

FIG. 1

SET PULSE BREW ?

NOYES

SET BY EXAMPLE ?

NOYES

CONTAINER RDY ?

NOYES

PRESS BREW TO

SET 1st ON-TIME

PRESS BREW TO

END 1st ON-TIME

PRESS BREW TO

END OFF-TIME

PRESS BREW TO

END LAST ON-TIME

3 BATCHES DONE ?

NOYES

EXIT TO

NEXT FUNCTION

SCREEN

41343 080108