PROGRAMMING FUNCTIONS - (cont.)
SET PULSE BREW - ENTER TIMES
This function allows adjustment of the pulse brew by entering actual times for each of the settings.
Procedure to enter actual times for pulse brew: NOTE: The procedure to enter the Pulse Brew Function
(Page 21) area of the program must be performed prior following the steps listed below.
1.Press and release YES. The display should now read SET BY EXAMPLE.
2.Press and release NO. The display will read ENTER
TIMES?
3.Press YES to proceed. The display should now read 1st ON TIME.
4.Using
5.When finished, press DONE. The display will now read OFF TIME X:XX.
6.Using
7.When finished, press DONE. The display will now read LAST ON TIME X:XX
8.Using
9.When finished, press DONE. The display will show the three times just entered for that batch size. After a 5 second delay, the display will read 3 BATCHES
DONE?
10.If other batch sizes need to be modified, press NO. The display will then read SET BY EXAMPLE.
11.In that screen, press NO. The display should now read ENTER TIMES.
12.Press YES in this screen, then press a different batch size pad and repeat steps 3 through 5. Re- peat until all the desired batch sizes are set (for the left side on DUAL brewers).
13.When finished press YES in 3 BATCHES DONE?. The display will then read SET PREINFUSION.
14.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the SET PULSE BREW function and return
to the MAIN SCREEN.
NOTE: Pressing the upper right hidden button before reaching the final setting screen exits the setup and retains the old values.
SET PULSE BREW ?
NO YES
SET BY EXAMPLE ? |
| |
NO | YES | EXIT TO |
|
| |
|
| NEXT FUNCTION |
|
| SCREEN |
ENTER TIMES?
NO YES
1st ON TIME X:XX
OFF TIMES: X:XX
LAST ON: PreI
1st OFF LAST
X:XX X:XX PreI
3 BATCHES DONE ? |
| |
NO | YES | EXIT TO |
|
| |
|
| NEXT FUNCTION |
|
| SCREEN |
Page 27 | 41343 080108 |
|
