Bunn 41343 Fresh Time Off - Done +, Freshness Time, Main Screen, PROGRAMMING THE BREWER cont

PROGRAMMING THE BREWER (cont.)

WARMER CONTROL (SETTING THE HEAT INTENSITY AND PROGRAMED TIME) (cont.)

10.Using (-)and (+), set the percent of heat to be applied to the warmer.

11.When finished, press the center program switch. The display should now read 3rd ON TIME on SINGLE brewers, (<-<-3rd ON TIME on DUAL brewers).

12.Using (-)and (+), set the amount of time the warm- ers are to operate.

13.When finished, press the center program switch. The display should now read 3rd ON POWER on SINGLE brewers, (<-<-3rd ON POWER on DUAL brewers).

14.Using (-)and (+), set the percent of heat to be applied to the warmer.

15.When finished, press the center program switch. The display will read FRESH TIME on SINGLE brewers, (1st ON TIME ->->on DUAL brewers).

16.On DUAL brewers, repeat steps 4 thru 14 for right side warmer.

17.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the WARMER CONTROL function and return to the MAIN SCREEN.

FRESHNESS TIME

This function activates a timer to provide a visual indication that the dispensed beverage has reached it's maximum hold time. All batch indicators on that side will flash when time expires.

NOTE: Flashing can be stopped by pressing any batch switch on the side activated, or by turning warmer off.

FRESH TIME: OFF (-) DONE (+)

P3262

Procedure for setting auto warm shut off:

1.Press and hold upper right hidden switch until the display reads UNITS. Press and release upper right hidden switch until the display reads FRESH TIME.

2.Using (-)and (+), set the amount of time the warmers are to be on before activating the alert.

3.Press DONE to store the programed time. The display should now read SET NEW RECIPE.

4.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the FRESH TIME function and return to the

MAIN SCREEN.

Page 14 41343 120710