C. Crane A-66 manual Trouble Shooting, Quick Pilot Light Diagnosis, Front Panel LED Indicators

Optipay™ CC

A-66 Coin Changer

A p p e n d i x A

A TROUBLE SHOOTING

If a Coin Changer fault occurs, the pilot lights at the top of the Coin Validator will indicate the fault’s location.

The following JCM diagnostic service tools are available to detail diagnose the fault’s cause (see the "Diagnosis Using the Setting Module" area in this appendix, as well as the in related information located in sections 1 and 11 of this manual).

Front Panel LED Indicators

If the Green LED at the top of the Coin Validator is lit or is flashing, no faults are indicated and the device is working properly (See Figure A-1).

If the Yellow LED in the middle of the Coin Validator flashes there is a definite fault which generally can be easily remedied.

If the Red LED at the bottom of the Coin Validator flashes, a fault that must be remedied by a service technician is probable.

The label at the top of the Coin Validator may help in locating the fault and Table A-1 lists their meanings.

Quick Pilot Light Diagnosis

Figure A-1Quick Diagnosis with the Help of the Pilot Lights

Table A-1 LED Indicator Meanings

LED	Meaning	Trouble
Green Lit	Coin changer	No error
	operational
Green	Filling level	No error
Flashing	mode active
Green &	Inserted coin	Check vending machine
Yellow Lit	inhibited	settings (a possibility
	from the	that high value coins
	Vending	were inhibited as tube is
	Machine	empty)

Table A-1 LED Indicator Meanings (Continued)

LED	Meaning	Trouble
Green &	Inserted coin	Activate coin channel
Red Lit	inhibited	using switching block or
	from the	Palm Setting Module
	Vending	with WinEMP© or Palm
	Machine	Pilot® with PalmA66©
Yellow	Return lever	Check return mecha-
Flashes	pressed or	nism in Vending
once	switch in Coin	Machine or
	Validator	Service case
	defective

5900335 © 2005 JCM-American Corporation

A - 1