Optipay™ CC
A-66 Coin Changer
S e c t i o n 6
6 ENERGIZING
This section provides energizing
Although the individual functions of the
In many cases the Vending Machine’s controls will offer a filling function. In this case they should be used, because the control unit might not accept the filling level capacity of the Coin Changer.
If the Cash Box contains coins, it must be emptied, otherwise new coins directed to the Cash Box will not be counted.
To begin the energizing process:
1.Press the Plus 
key (See Figure
2.Insert the coin tubes.
The Coin Validator’s tube counter meters in the accepted coins, and the Coin Changer sorts the corresponding coin type into its pre- configured tube until either:
–The full sensor is covered, or
–The maximum coin number is configured, or
–The float level is reached.
If the “float” function is active, tube coins inserted thereafter will not be accepted and will be directed to the return area tray.
Otherwise, they will be accepted and directed to the Cash Box.
If all the coin tubes are full:
3.Press the Plus 
key again.
Two audible signals will sound and the Green LED will light constantly indicating that the Coin Changer is no longer in the filling level mode and has returned to the operating mode.
If no coins are inserted in a 30 second time period, the Coin Changer will automatically return to the operating mode, without having to press the Plus 
key a second time.
Figure 6-1 Coin Validator Keyboard
5900335 © 2005
6 - 1
