Cabletron Systems 3Com PortSwitch Hub Local Snmp Application, Local Snmp View, Snmp Trap Table

Security Application

Local SNMP Application

Local SNMP Application

This application provides access to the Local SNMP view, allowing you to set SNMP Traps for this device. The model type for this application is 3ComSnmpApp2.

Local SNMP View

This view contains the following:

Next Free Index

Displays the index value for the next table entry.

Add Entry

Accesses the Add SNMP Table Entry view, which allows you to set the following values for a new entry.

SNMP Trap Table

This table stores the destination addresses of SNMP managers that wish to receive traps from this device. Double-clicking an entry in this table displays the SNMP Trap Table Entry view in which you can update values.

Index

Displays the index for this entry.

Destination

Displays the network address of the device to which the SNMP traps will be sent.

Protocol

Displays the transport protocol to use when sending the trap. Possible values are IP, IPX, and None.

Community

Displays the SNMP community string to be used when sending the trap. You can update this field.

Application Views	3Com PortSwitch Hubs
5-8	Management Module Guide