RMON Extensions Application
Protocol
Displays the protocol used to monitor the device. Writing to the address field causes a default protocol value, derived from the format/content of the address, to be setup. If the protocol is not supported or is not compatible with the address, an error is returned when the status is set to valid. Possible values are unknown, ip, ipx, netBIOS, appleTalk, and amp.
Timeout
Displays the
Attempt
Displays the number of unsuccessful requests necessary before deciding that the device is not responding.
Period
Displays how often the device will be polled, in seconds. The first poll is sent as soon as the status becomes valid.
Last Request
Displays the time, counting from the last system reset, at which the most recent request packet was sent.
LastReply
Displays the time, counting from the last system reset, at which the most recent request packet was received.
Information
After each poll, this field is updated with
Success Index
Displays the index of the event that is used when a successful poll is made after a number of unsuccessful ones. If this value is zero, no event will be generated.
Failure Index
Displays the index of the event that is used when an unsuccessful poll is made after a number of successful ones. If this value is zero, no event will be generated.
Owner
Displays the owner of the device. RMON OwnerString conventions are used here to help control
Status
Displays the creation or deletion status of entries in the PollTable. RMON EntryStatus conventions are used.
Application Views | 3Com PortSwitch Hubs |
Management Module Guide |