Serial I/f Application
Slip Mgmt
If the Management type is Distributed, this field displays the entry in the interface table which represents the potential SLIP (serial port) management interface for the device. If this is zero there is no SLIP access port available on the device.
Serial I/f Application
The Serial Interface application supports the V.24 Port Config view, and serves as the anchor point for the Interface Extensions application, the Port Security application, and the Mrm Resilience application. The model type for this application is 3ComserIfApp.
V.24 Port Config View
This view contains the V.24 Port Config Table and Slip Port field.
Slip Port
The serial port which SLIP can use to send and receive packets. If this field has a value of 0xffff, then SLIP can not send or receive packets. You can update this field.
V.24 Port Config Table
This table describes the configuration parameters for the V.24 ports. Double- click an entry to accesses the V.24 Configuration Table Entry view in which you can update the selected entry.
This table contains the following:
Id
Displays the Port ID and index for this table.
Conn
Displays whether the port is connected Local to a terminal or terminal emulator, or Remote to a modem. If it is Local no interface signals need to be asserted unless by other management options. If it is Remote, at least DSR is required.
Auto Con
Displays Enabled if the next four parameter values are determined automatically from an initial character sequence entered by the user. Displays Disabled if the parameter values are entered explicitly.
9032295 E2 | Application Views |
|
