Cabletron Systems 3Com PortSwitch Hub manual Security Users Table view

Security Application

Security Users Table view

This view allows you to add and delete users and to modify their security levels. The default users, Monitor, Manager, and Security, cannot be deleted. Double-clicking an entry in this table displays the Security Enable Table Entry view.

This table displays the following:

Status

Displays the user status. Possible values are Valid and Invalid. A value of Invalid means the user can no longer access the device. The default users, Monitor, Manager, and Security, can not have their status changed to Invalid. You can update this field in the Security Users Table Entry view.

Name

Displays the user name. This is the index for the table. Empty user names are not allowed.

Level

Displays the user access level. This access level defines the scope of management this user can perform. The levels of security are the same as in the Security Enable Table described on Page 5-5. You can update this field for all users except the default users.

Password

Displays the password required for user confirmation when access is made from the local serial port, the front panel, or through Telnet. The Password field is only available in the Security Users Table Entry view and is a write- only field.

Community

Displays a string identifying the user when access is through the original community-based SNMP (RFC1157). You can update this field.

Local Party

Displays the local party identity of the user when access is through secure SNMP. You can update this field.

Manager Party

Displays the manager party identity of the user when access is through secure SNMP. You can update this field.

Add Entry

Allows you to add entries to the table.

Application Views	3Com PortSwitch Hubs
5-6	Management Module Guide