SuperStack Application
SuperStack Configuration View
Capabilities
Displays the capabilities of the device. This is used in conjunction with the upgrade level of the stack to enable a management application to correctly enable and disable the various features of the application depending on the capabilities of the unit.
The object is an octet string, where each octet represents a capability. Possible values are shown in Table
Table 5-9. SuperStack Table Capability Values
Value | Description |
|
|
01 | Full RMON |
|
|
02 | 3Com Proprietary repeater resilience |
|
|
03 | 3Com Repeater Security MIB |
|
|
If a unit has a value of '02 03' for this object, then it supports repeater resilience and security, but no other features such as RMON.
Prom Version
Displays the PROM version number on the device. If the unit has no PROM, does not correctly report the PROM version, or is currently
HW Version
Displays the hardware version number of the device. If the hardware version is not available, this will be empty.
SW Version
Displays the software version number of the device. If a unit does not make its version number information available, or the device has no software, this will be empty.
Serial Number
Displays the serial number for the device.
Attention
Displays if there is an attention mechanism on a device. Possible values are No Attention and Attention.
Some units contain a mechanism for drawing attention, which is useful for directing maintainance personnel. This is often done by flashing a special LED.
Mgmt If
If the Management type is Distributed, this field displays the entry in the interface table which represents the potential management interface for the device. If this is zero, there is no management available for the device.
Application Views | 3Com PortSwitch Hubs |
Management Module Guide |
