Cabletron Systems 3Com PortSwitch Hub manual CsEvFormat/Event00ea0061 No Probable cause message

Device Events and Alarms

Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)

Message in the Event Log	Alarm View Probable Cause
	Message
CsEvFormat/Event00ea0061	No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the managed agent has recieved a reply to a poll after a sequence of four or more un- successfull polls. The addres is {S 1} with protocol {T pprot 3}. (event [{e}])

CsEvFormat/Event00ea0062

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the managed agent has not recieved a reply to a poll after a sequence of four un- successfull polls. The address is {S 1} with protocol {T pprot 3}. (event [{e}])

CsEvFormat/Event00ea0063

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the Resilient Backup Power Supply connected to this repeater has developed a fault. (event [{e}])

CsEvFormat/Event00ea0064

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the Resilient Backup Power Supply connected to this repeater has recovered from a fault. (event [{e}])

CsEvFormat/Event00ea0066

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that a port {I 2} has seen an unrecognised MAC address and is doing the following action {I 1} (2=Notify, 3=Disconnect). (event [{e}])

CsEvFormat/Event00ea0067

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that a repeater {I 2} has had its Bandwith Used threshold {I 3} exceeded. The Bandwith used is {I 1} (event [{e}])

Event and Alarm Messages	3Com PortSwitch Hubs
4-10	Management Module Guide