9032295 E2 Event and Alarm Messages
4-9
Device Events and Alarms
CsEvFormat/Event00ea0048
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that either
the main and backup rings have
wrapped or that the wrap condition has
been removed. The new wrap state is {I
1} (1=NotWrapped, 2=Wrapped). (event
[{e}])
No Probable cause message.
CsEvFormat/Event00ea0049
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a MAU
port {I 2} has had a change in attach
state and the admin state of the port is
disabled. The new attach state is {I 1}
(1=Absent, 2=Present). (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0050
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
Ring In port has changed state while
the mode is fail-safe. The new Ring In
state is {I 1} (1=Open, 2=Wrap). (event
[{e}])
No Probable cause message.
CsEvFormat/Event00ea0051
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
Ring Out port has changed state while
the mode is fail-safe. The new Ring Out
state is {I 1} (1=Open, 2=Wrap). (event
[{e}])
No Probable cause message.
CsEvFormat/Event00ea0060
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a MAU
port {I 2} has changed state due to
operation of ZDL or DRI. The new MAU
port state is {I 1} (1=Enabled,
2=Disabled). If disabled the reason is {I
3} (1=None, 2=Mgmt, 3=ZDL, 4=DRI).
(event [{e}])
No Probable cause message.
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message