Cabletron Systems 3Com PortSwitch Hub Interface Extensions Application, Interface Extensions View

Serial I/f Application

Interface Extensions Application

Speed

Displays the receive and transmit speed of the port if AutoConfig is disabled. Different speeds for transmit and receive are not possible.

Char Size

Displays the character size if AutoConfig is disabled. Possible values are size7 and size8.

Stop Bits

Displays the number of stop bits, either 1, 1.5, or 2, if AutoConfig is disabled.

Parity

Displays the parity option to use if AutoConfig is disabled.

DSR Cont

This field only applies to Local connection types. It displays whether DSR needs to be asserted for a local connection to be made and if the connection needs to be released if the DSR is seen deasserted.

DCD Cont

This field only applies to Local connection types. It displays whether DCD needs to be asserted for a local connection to be made and if the connection needs to be released if the DCD is seen deasserted.

Flow Cont

Displays the flow control protocol to be used.

Update

Set this field to Change using the V.24 Configuration Table Entry view to force the port to update its parameters.

Interface Extensions Application

This application provides the Interface Extensions view. The model type for this application is 3ComExtIfApp.

Interface Extensions View

This view contains the Interface Extensions Table. Double-click an entry to access the RFC1516 Extension Entry view, which allows you to modify an interface.

If

Displays the interface number.

Enable Bootp

Displays whether BootP is enabled or not.

Application Views	3Com PortSwitch Hubs
5-22	Management Module Guide