Cabletron Systems manual Contents, viii, HSIM-A6DP User’s Guide

Contents

3.8	The ATM Redundancy Configuration Screen		3-15
	3.8.1	ATM Redundancy Configuration Screen Fields	3-16
	3.8.2	Setting the Redundancy Status	3-18
	3.8.3	Setting the Primary Port	3-18
	3.8.4	Setting the Active Port	3-18
	3.8.5	Setting the Activation of Redundant Port Field	3-19
	3.8.6	Setting the Revert to Primary Port Field	3-19
	3.8.7	Setting the Periodic Test Status Field	3-20
	3.8.8	Setting the Periodic Test Time	3-20
	3.8.9	Using the TEST PORTS NOW Command	3-21
	3.8.10	Using the RESET TO FACTORY DEFAULTS
		Command	3-21
3.9	The ATM LEC Screen		3-22
	3.9.1	ATM LEC Screen Fields	3-23
3.10	The ATM LEC Table Screen		3-24
	3.10.1	ATM LEC Table Screen Fields	3-25
3.11	The LEC Administration Screen		3-27
	3.11.1	LEC Administration Screen Fields	3-28
	3.11.2	Changing the LEC Status (MODIFY MODE Only)	3-30
	3.11.3	Configuring the LEC Automatically
		(CREATE MODE Only)	3-30
	3.11.4	Configuring the LEC Manually
		(CREATE MODE Only)	3-31
	3.11.5	Modifying an Existing LEC	3-32
	3.11.6	Deleting an Existing LEC	3-33
3.12	The ELAN Properties Screen		3-34
	3.12.1	ELAN Properties Screen Fields	3-34
3.13	The LEC ARP Cache Screen		3-37
	3.13.1	LEC ARP CACHE Screen Fields	3-38
3.14	The LEC ARP Cache Search Screen		3-40
	3.14.1	LEC ARP Cache Search Screen Fields	3-41
	3.14.2	Performing a Search	3-41
3.15	The Signalling Screen		3-44
	3.15.1	Signaling Screen Fields	3-45
	3.15.2	Changing the ILMI Status	3-46
	3.15.3	Disabling the ILMI Status	3-47
	3.15.4	Changing the UNI Status	3-48
	3.15.5	Restarting UNI	3-48
	3.15.6	Restarting the ILMI	3-48
	3.15.7	Setting the UNI Version	3-49
3.16	The Discovery ELAN Setup Screen		3-50
	3.16.1	ATM Discovery ELAN Setup Screen Fields	3-51
	3.16.2	Assigning the HSIM-A6DP to a discovery ELAN	3-52
3.17	Using the Bandwidth Allocation Mode Feature		3-54

viii HSIM-A6DP User’s Guide