Chapter 3: Local Management
3.15.4 Changing the UNI Status
To change the UNI status from the default state of [Enabled] perform the following steps:
1.Use the arrow keys to highlight the UNI Status field.
2.Press the SPACE bar until the option [Disabled] displays.
Before completing the following step, ensure that this caution is
!fully understood. By disabling UNI, ALL SVCs currently
CAUTION | operating on the |
|
3.Use the arrow keys to highlight the SAVE command located at the bottom of the screen and press ENTER. UNI has been disabled.
3.15.5Restarting UNI
To restart UNI perform the following steps:
1.Use the arrow keys to highlight the RESTART UNI command located on the bottom of the screen.
Before completing the following step, ensure that this caution is
!fully understood. By restarting UNI, ALL SVCs currently
CAUTION | operating on the |
|
2.Press ENTER. UNI has been restarted.
3.15.6 Restarting the ILMI
To restart the ILMI perform the following steps:
1.Use the arrow keys to highlight the RESTART ILMI command located on the bottom of the screen.
Before completing the following step, ensure that this caution is
!fully understood. By restarting ILMI, ALL SVCs currently
CAUTION | operating on the |
|
2.Press ENTER. The ILMI has been restarted.