Chapter 3: Local Management
3.12THE ELAN PROPERTIES SCREEN
To access the ELAN Properties screen from the ATM LEC screen, perform the following steps:
1.Use the arrow keys to highlight the LEC PROPERTIES menu item of the ATM LEC screen.
2.Press ENTER; the ELAN Properties screen, Figure
| |
INTERFACE 25 ELAN PROPERTIES | |
Device | Flash Image Revision: XX.XX.XX |
Slot Number: X | BOOTPROM Revision: XX.XX.XX |
LEC Index: 1 | LEC STATE: initialState(1) |
LEC ID: 0 | Status: notInService(2) |
LANE Version: [1.0] | Actual ELAN Name: |
LEC ATM ADDR: 0x00.0000.00.000000.0000.0000.0000.000000000000.00
LECS ATM ADDR: 0x00.0000.00.000000.0000.0000.0000.000000000000.00
LES ATM ADDR: 0x00.0000.00.000000.0000.0000.0000.000000000000.00
BUS ATM ADDR: 0x00.0000.00.000000.0000.0000.0000.000000000000.00
LECS Configuration Direct VCC: 0, 0
LES Control Direct VCC: 0 ,0
LES Control Distribute VCC: 0, 0
BUS Multicast Send VCC: 0, 0
BUS Multicast Forward VCC: 0, 0
NEXT | PREV | EXIT | RETURN |
Figure
3.12.1 ELAN Properties Screen Fields
The ELAN Properties screen is a
The following list explains each of the ELAN Properties screen fields:
LEC Index
This field is used to identify this LEC in the ATM Forum’s LEC MIB. This value is provided dynamically and is not modifiable by the user.