The ATM Redundancy Configuration Screen
3.8THE ATM REDUNDANCY CONFIGURATION SCREEN
NOTE |
There MUST be two APIMs installed in the
To access the ATM Redundancy Configuration screen from the ATM screen, perform the following steps:
1.Use the arrow keys to highlight the APIM REDUNDANCY menu item from the ATM screen.
2.Press ENTER. The ATM Redundancy Configuration screen, Figure
| ||
INTERFACE 25 ATM REDUNDANCY CONFIGURATION |
| |
Device | Flash Image Revision: XX.XX.XX | |
Slot Number:X | BOOTPROM Revision: XX.XX.XX | |
Redundancy Status: [Enabled] |
|
|
Primary port: 1 | Active port: 1 |
|
Activation of redundant port: [Automatic] |
| |
Revert to Primary port: [Automatic] |
|
|
Periodic test status: [Enabled] | Periodic test time: 01:00.00 |
|
Result of previous test: [ ] No test perfromed since system startup |
| |
TEST PORTS NOW | RESET TO FACTORY DEFAULTS | |
SAVE | EXIT | RETURN |
|
|
|