Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems HSIM-A6DP manual Setting the Redundancy Status, Setting the Primary Port

Models: HSIM-A6DP

1 100

Download 100 pages 18.73 Kb

Page 44

Chapter 3: Local Management

TEST PORTS NOW (Command)

This command, when performed, instructs the HSIM-A6DP to perform an APIM redundancy test immediately. When the test is completed, the results are displayed in the Results of previous test ﬁeld.

RESET TO FACTORY DEFAULTS (Command)

This command, when performed, resets all the ﬁelds in the ATM Redundancy Conﬁguration screen to their default settings.

SAVE (Command)

This command saves all changes to memory.

3.8.2Setting the Redundancy Status

To set the Redundancy Status, perform the following steps:

1.Use the arrow keys to highlight the Redundancy Status field.

2.Press the SPACE bar to toggle between the choices until the desired mode displays ([Enabled] or [Disabled]).

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER. The changes are saved to memory.

3.8.3Setting the Primary Port

To set the Primary port, perform the following steps:

1.Use the arrow keys to highlight the Primary port field.

2.Press the SPACE bar to toggle between the choices until the desired port displays (1 or 2).

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER. The changes are saved to memory.

3.8.4Setting the Active Port

To set the Active port, perform the following steps:

1.Use the arrow keys to highlight the Active port field.

2.Press the SPACE bar to toggle between the choices until the desired port displays (1 or 2).

3-18	HSIM-A6DP User’s Guide

Image 44

Cabletron Systems HSIM-A6DP manual Setting the Redundancy Status, Setting the Primary Port, Setting the Active Port

Contents

HSIM-A6DP User’s Guide APIMAPIM HSIM-A6DPPage HSIM-A6DP User’s Guide Only qualiﬁed personnel should perform installation proceduresFCC NOTICE DOC NOTICE VCCI NOTICECABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT HSIM-A6DP User’s GuideEXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY CABLETRON SOFTWARE PROGRAM LICENSEUNITED STATES GOVERNMENT RESTRICTED RIGHTS HSIM-A6DP User’s GuideSAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERSLASER RADIATION AND CONNECTORS HSIM-A6DP User’s GuideDECLARATION OF CONFORMITY HSIM-A6DP User’s GuideApplication of Council Directives 89/336/EEC 73/23/EEC Manufacturer’s Name Cabletron Systems, IncHSIM-A6DP User’s Guide CONTENTS INSTALLATIONCHAPTER INTRODUCTIONHSIM-A6DP User’s Guide Contentsviii Contents APIM SPECIFICATIONSCHAPTER LANVIEW LEDsContents HSIM-A6DP User’s GuideCHAPTER INTRODUCTION 1.1 USING THIS MANUAL 1.2 DOCUMENT CONVENTIONS1.4 FEATURES 1.3 OVERVIEWLANVIEW Diagnostic LEDs ATM Port Interface Modules APIMsCabletron Systems ATM Technology Guide 1.5 SPECIFICATIONS1.6 RELATED MANUALS 1.7 GETTING HELP Chapter 1 Introduction HSIM-A6DP User’s GuideCHAPTER INSTALLATION 2.1 UNPACKING THE HSIM2.2 INSTALLING APIMs 6. Secure the APIM with the three screws saved in Step 2.3 INSTALLING AN HSIM 2.3.1 Installing an HSIM in an Interface ModuleInstalling an HSIM HSIM-A6DP User’s GuideFigure 2-3 Removing the HSIM Coverplate Standoff Screws Coverplate Faceplate Mounting Screws7. Place the HSIM behind the module faceplate. See Figure 2.3.2 Installing an HSIM in a Standalone Hub In Step 9 ensure that the standoffs on the hub align with the standoff screw holes on the HSIM to prevent bending the pins CHAPTER LOCAL MANAGEMENT 3.1 LOCAL MANAGEMENT KEYBOARD CONVENTIONS Chapter 3 Local ManagementHSIM-A6DP User’s Guide Table 3-1 Keyboard Conventions3.2.2 Exiting Local Management Screens 3.2 NAVIGATING LOCAL MANAGEMENT SCREENS3.2.1 Selecting Local Management Menu Screen Items 5. Press ENTER. The Password screen displays and the session ends 3.3 ACCESSING LOCAL MANAGEMENT 3.4 THE HSIM-A6DP ATM SCREEN SIGNALLINGCONNECTIONS APIM REDUNDANCY3.5 THE ATM CONNECTIONS SCREEN 3.5.1 ATM Connections Screen Fields 3.6 THE ATM CONNECTION SETUP SCREEN 3.6.1 ATM Connection Setup Screen Fields PREVIOUS Command NEXT CommandADD/DELETE Command Encapsulation Type Read-Only3.7 THE ADD/DELETE ENTRY SCREEN 3.7.1 Add/Delete Entry Screen FieldsEncapsulation Type Toggle 3.7.2 Adding an Entry PVCADD/MODIFY Command 3.7.3 Modifying an Entry PVC 3.7.4 Deleting an Entry PVC3.8 THE ATM REDUNDANCY CONFIGURATION SCREEN Figure 3-6 The ATM Redundancy Conﬁguration Screen3.8.1 ATM Redundancy Conﬁguration Screen Fields Active Port Read-Only Activation of redundant port ToggleRevert to Primary port Toggle Periodic test status Toggle3.8.2 Setting the Redundancy Status 3.8.3 Setting the Primary Port3.8.4 Setting the Active Port TEST PORTS NOW Command3.8.5 Setting the Activation of Redundant Port Field 3.8.6 Setting the Revert to Primary Port Field3.8.7 Setting the Periodic Test Status Field 3.8.8 Setting the Periodic Test Time3.8.9 Using the TEST PORTS NOW Command 3.8.10 Using the RESET TO FACTORY DEFAULTS Command3.9 THE ATM LEC SCREEN 3.9.1 ATM LEC Screen Fields LEC ADMINISTRATIONLEC TABLE LEC PROPERTIES3.10 THE ATM LEC TABLE SCREEN 3.10.1 ATM LEC Table Screen Fields operational - The LEC is now fully conﬁgured, and is switching trafﬁc 3.11 THE LEC ADMINISTRATION SCREEN 3.11.1 LEC Administration Screen Fields LEC Status Read-OnlyConﬁgure LEC Toggle MAX MTU Size ToggleThis command adds the LEC to the HSIM-A6DP LEC Index 3.11.2 Changing the LEC Status MODIFY MODE Only 3.11.3 Conﬁguring the LEC Automatically CREATE MODE Only3.11.4 Conﬁguring the LEC Manually CREATE MODE Only 3.11.5 Modifying an Existing LEC 3.11.6 Deleting an Existing LEC 3.12 THE ELAN PROPERTIES SCREEN 3.12.1 ELAN Properties Screen FieldsThis ﬁeld displays the name of the ELAN to which this LEC belongs LECS ATM ADDR Read-Only LES ATM ADDR Read-OnlyBUS ATM ADDR Read-Only LECS Conﬁguration Direct VCC Read-Only3.13 THE LEC ARP CACHE SCREEN 3.13.1 LEC ARP CACHE Screen Fields This command opens the next series of MAC/ATM Address pairs. To access the next series of address pairs, highlight the NEXT command by using the arrow keys and pressing ENTER. The next series of MAC/ATM address pairs displays 3.14 THE LEC ARP CACHE SEARCH SCREEN Figure 3-12 The LEC ARP Cache Search Screen3.14.1 LEC ARP Cache Search Screen Fields 3.14.2 Performing a SearchWhen the search is completed, the following information displays This ﬁeld displays the name of the ELAN to which this LEC belongs 3.15 THE SIGNALLING SCREEN 3.15.1 Signaling Screen Fields 3.15.2 Changing the ILMI Status RESTART UNI CommandRESTART ILMI Command UNI Q93b Status Read-Only3.15.3 Disabling the ILMI Status 3.15.6 Restarting the ILMI 3.15.4 Changing the UNI Status3.15.5 Restarting UNI 3.15.7 Setting the UNI Version 3.16 THE DISCOVERY ELAN SETUP SCREEN Figure 3-15 The ATM Discovery ELAN Setup Screen3.16.1 ATM Discovery ELAN Setup Screen Fields The default ELAN does not have a name assigned to itself3.16.2 Assigning the HSIM-A6DP to a discovery ELAN SAVEPREV NEXT3. Use the arrow keys to highlight the Status field 3.17 USING THE BANDWIDTH ALLOCATION MODE FEATURE 3.18 ENABLING THE BANDWIDTH ALLOCATION MODE FEATUREFigure 3-16 The ATM Connection Screen Do not perform the following steps unless the Bandwidth 3.19 CREATING PVCS WITH THE BANDWIDTH ALLOCATION MODE ENABLED Figure 3-18 The ATM Connection Setup Screen3.19.1 ATM Connection Setup Screen Fields This ﬁeld displays the total amount of bandwidth assigned to this PVC IF Modiﬁable 3.20 THE ADD/DELETE ENTRY SCREEN3.20.1 Add/Delete Entry Screen Fields ADD/MODIFY Command The Add/Delete Entry ScreenEncapsulation Type Toggle Total Bandwidth On Interface Read-Only3.20.2 Adding an Entry PVC 3.20.3 Modifying an Entry PVC 3.20.4 Deleting an Entry PVC CHAPTER LANVIEW LEDs 4.1 HSIM-A6DP LEDsChapter 4 LANVIEW LEDs HSIM-A6DP User’s GuideTable 4-1 HSIM LEDs ColorAPPENDIX A APIM SPECIFICATIONS A.1 APIM-11 SPECIFICATIONSA.2 APIM-21 SPECIFICATIONS The APIM-29 A.3 APIM-29 SPECIFICATIONSFigure A-3 A.4 APIM-29LR SPECIFICATIONS A.5 APIM-22 SPECIFICATIONS Receive +A.6 APIM-67 SPECIFICATIONS The APIM-67R does not use Cell Payload ScramblingFigure A-6 APIM-67R Default Jumper Settings APIM-67 SpeciﬁcationsHSIM-A6DP User’s Guide Figure A-7 The APIM-67Appendix A APIM Speciﬁcations HSIM-A6DP User’s Guide