Cabletron Systems manual Post-Installation, Installing the WPIM-T1/DDS

Installing the WPIM-T1/DDS

WPIM

T1

WPIM Screws

WPIM

Connector

DDS

WPIM

T1/DDS-RT1

WPIM

Connector Pins

Standoffs

Figure 2-1 Installing the WPIM-T1/DDS

2.1.4Post-Installation

1.Reinstall the cover as applicable.

2.Refer to the host platform user’s guide to reinstall the network cables and refer to Appendix A for cabling information for the WPIM-T1/DDS. Do not connect the WAN cable until instructed to do so.

3.Refer to instructions contained in the host platform user’s guide to reapply power.

4.After reapplying power, check the LEDs for the following conditions:

•Verify that the PWR LED is on, indicating that the device is receiving power.

•After the host platform runs a self test, the CPU LED blinks green indicating normal operation.

•If the CPU LED remains red, contact Cabletron Systems.

WPIM-T1/DDS User’s Guide 2-3