Cabletron Systems T1 manual Local Management for DDS Service

Chapter 4: Local Management for DDS Service

4.1THE WAN PHYSICAL CONFIGURATION SCREEN

To access the WAN Physical Configuration screen in Local Management, use the arrow keys to highlight the WAN SETUP menu item, then press ENTER. The screen shown in Figure 4-1displays, with the WPIM-T1/DDS in DDS mode.

<host name> Local Management		Flash Image Version: xx.xx.xx
		WAN PHYSICAL CONFIGURATION
WPIM 1
Type:	DDS
WPIM #:	1
MgrType:	[None]
Max VCs:	000
Next IF:	N/A

WPIM 1 Line Configuration
DDS Line Mode:		[DDS-PRI]	DDS In-Speed:		56000
DDS Tx Clock Source:		[Loop-Timing]	DDS Out-Speed:		56000
DDS Loop-Back:		[NONE]
SAVE	[WPIM 1]	WAN INT CONFIG	REMOTE SETUP	RETURN

2750_01

Figure 4-1 WAN Physical Configuration Screen

4.1.1WAN Physical Configuration Screen Fields

The following sections describe WAN Physical Configuration screen fields and provide instructions for setting them. The WAN Physical Configuration screen lets you configure the WPIM or “Physical Interface.”

NOTE

When there is more than one WPIM installed into the host platform, information for the second WPIM will display next to WPIM 1.

The Type field displays either T1 or DDS, depending on the mode selected using Network Tools.

4-2 WPIM-T1/DDS User’s Guide