CHAPTER 2
SETUP AND INSTALLATION
Only qualified personnel should install the WPIM-T1/DDS. This User’s Guide is intended for the experienced network equipment installer.
This chapter details set up and installation of the WPIM-T1/DDS into a host platform.
QuickSET or Local Management must be used to set up the WPIM-T1/DDS in management before any connections are made to the WAN. Follow the directions carefully.
2.1INSTALLING THE WPIM-T1/DDS
For additional support related to the WPIM-T1/DDS, refer to the host platform manual into which the WPIM-T1/DDS is being installed. Locate the guide by clicking on the Cabletron Systems QuickSET program group icon after installing the QuickSET CD on your computer, or see Related Manuals in the Introduction.
Some WPIMs require version 1.02 or greater of QuickSET to participate and function correctly in your network. Contact Cabletron Systems to obtain the latest version of QuickSET if you do not have it. Refer to Getting Help in the Introduction for more information.
2.1.1Unpacking the WPIM-T1/DDS
Both the WPIM-T1/DDS and the host platform in which the WPIM-T1/DDS is installed are static sensitive devices. Use a grounding strap and follow all static-safe precautions during installation. Failure to do so could result in damage to the WPIM-T1/DDS and the host platform receiving it.
1.Carefully remove the WPIM-T1/DDS from the shipping box.
2.Visually inspect the WPIM-T1/DDS. If there are any signs of damage, contact Cabletron Systems immediately. Refer to Getting Help.
WPIM-T1/DDS User’s Guide | 2-1 |
