![](/images/new-backgrounds/1186023/18602397x1.webp)
The WAN Physical Configuration Screen
To select the
1.Use the arrow keys to highlight the WPIM X command field at the bottom of the screen.
2.Use the SPACE bar to select the appropriate WPIM, then press ENTER. The WAN Configuration screen automatically displays unique configuration fields for the
The WAN Physical Configuration screen displays the following fields:
WPIM
Displays configuration information for two different WPIMs.
Type
Displays the type of WPIM installed. For the
WPIM #
Displays the number of the slot in which the WPIM resides.
Mgr Type (Selectable)
The type of protocol manager is chosen in this field. For the DDS mode of the
Max VCs (Modifiable)
Displays the maximum number of virtual circuits (interfaces) that the
Next IF
Displays the next interface available to be used.
SAVE (Command)
Saves the chosen configuration.
WPIM X (Toggle)
User selects the WPIM to be configured. Once it is selected, the user can enter the screens of the WPIM selected to modify the data.
WAN INT CONFIG (Command)
When this field is highlighted and the ENTER key is pressed, the WAN Interface Configuration screen displays. Refer to Section 4.2 for details.
|