CHAPTER 4
LOCAL MANAGEMENT FOR DDS SERVICE
This chapter explains how to configure the WPIM-T1/DDS through Local Management. The WAN Physical Configuration screen and the WAN Interface Configuration screen display as Local Management menu selections after the WPIM-T1/DDS is installed into a host platform. Refer to the host platform User’s Guide for instructions about how to set up and access Local Management.
Sections of this chapter include the following:
•The WAN Physical Configuration Screen, Section 4.1
•The WAN Interface Configuration Screen, Section 4.2
•WPIM-DDS Configuration, Section 4.3
Read Section 4.1 and Section 4.2 to gain an understanding of the WPIM-T1/DDS Local Management screens. Section 4.3 provides examples for setting up the WPIM-DDS in a PPP or Frame Relay environment.
The WPIM-T1/DDS cannot operate in both T1 and DDS mode at the same time. The user must choose the appropriate service, but can change it when desired. Refer to Section 2.3.1 to choose the mode.
When the WPIM-T1/DDS is first powered up, the default is T1.
WPIM-T1/DDS User’s Guide | 4-1 |
