Cadillac 2015 - CRC 3-50 Seats and Restraints

Black plate (50,1)
Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-7707485) -
2015 - CRC - 10/31/14
3-50 Seats and Restraints
{Caution
Do not let the LATCH
attachments rub against the
vehicle’s safety belts. This may
damage these parts. If necessary,
move buckled safety belts to
avoid rubbing the LATCH
attachments.
Do not fold the empty rear seat
with a safety belt buckled. This
could damage the safety belt or
the seat. Unbuckle and return the
safety belt to its stowed position,
before folding the seat.
If you need to secure more than one
child restraint in the rear seat, see
Where to Put the Restraint on
page 3-44.
Youcannot secure three child
restraints using the LATCHanchors
in the rear seat at the same time,
but you can install two of them.
If you want to do this, install one
LATCHchild restraint in the right
rear seating position, and install the
other one either in the left rear
seating position or in the center
seating position. If you need to
install child restraints in both the
center and left rear seating
positions, the one in the center
seating position will need to be
secured using the vehicle safety
belts instead of the LATCHanchors.
Refer to the following illustration to
learn which anchors to use.
There are five lower LATCHanchors
in the rear seat.
.Use anchors 1 and 2 when
installing a child restraint using
LATCHin the right rear seating
position.
.Use anchors 3 and 4 when
installing a child restraint using
LATCHin the center rear seating
position.