Vehicle Care

10-23

{Caution

Continuing to drive with worn-out brake pads could result in costly brake repair.

Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with the brakes.

Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect brake pads for wear and evenly tighten wheel nuts in the proper sequence to torque specifications. See Capacities and Specifications on page 12-2.

Brake pads should be replaced as complete sets.

Brake Pedal Travel

See your dealer if the brake pedal does not return to normal height, or if there is a rapid increase in pedal travel. This could be a sign that brake service may be required.

Replacing Brake System Parts

Always replace brake system parts with new, approved replacement parts. If this is not done, the brakes may not work properly. The braking performance expected can change in many other ways if the wrong replacement brake parts are installed or parts are improperly installed.

Brake Fluid

The brake master cylinder reservoir is filled with DOT 3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview on page 10-5for the location of the reservoir.

There are only two reasons why the brake fluid level in the reservoir might go down:

.The brake fluid level goes down because of normal brake lining wear. When new linings are installed, the fluid level goes back up.

.A fluid leak in the brake hydraulic system can also cause a low fluid level. Have the brake

Page 292
Image 292
Cadillac 2015 - CRC manual Brake Fluid, Vehicle Care 10-23, Brake Pedal Travel, Replacing Brake System Parts