Cadillac 2015 - CRC manual Open the center console storage area and the storage tray

2-6 Keys, Doors, and Windows

1.Open the center console storage area and the storage tray.

2.Place the recognized transmitter(s) in the pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats.

3.Remove the key lock cylinder cap. See Door Locks on

page 2-11. Insert the vehicle key into the key lock cylinder on the driver door handle. Then turn the key counterclockwise, to the unlock position, five times within 10 seconds.

The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, ETC.

4.Replace the recognized transmitter with a new transmitter. Place the new transmitter in the transmitter pocket.

5.Press the ENGINE START/ STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the next transmitter.

6.Remove the transmitter from the transmitter pocket and press K or Q on the transmitter.

To program additional transmitters, repeat Steps 3–5.

When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately

12 seconds to exit programming mode.

7.Return the key back into the transmitter.