Cadillac 2015 - CRC manual Easy Exit Recall Driver Only, Obstructions

3-10 Seats and Restraints

.Press K on the RKE transmitter when the driver door is already open.

.Press the lock/unlock button on the outside driver door handle and open the driver door. The RKE transmitter must be present for the recall to activate.

To activate the recall when On - At Ignition On is selected in the vehicle personalization menu:

.Place the ignition in ON/RUN/

START.

See Vehicle Personalization on page 5-47.

To stop recall movement, press one of the memory, power mirror,

or power seat controls; or press the power tilt and telescoping steering column control. If On - At Ignition On is selected in the vehicle personalization menu, placing the ignition in OFF/LOCK also stops the recall.

RKE transmitters are not labeled with a number. If your memory seat position is stored to "1" or "2" but this position is not automatically recalling, then change the stored position or switch RKE transmitters with the other driver.

Easy Exit Recall (Driver Only)

If programmed on in the vehicle personalization menu, the easy exit feature automatically moves the driver seat, power tilt and telescoping steering column, and outside mirrors on some vehicles to the memory positions and settings

saved to the B (Exit) button. See “Storing Memory Positions” listed previously. See also Vehicle Personalization on page 5-47.

Easy exit recall automatically activates when one of the following occurs:

.The vehicle is turned off and the driver door is opened within a short time.

.The vehicle is turned off with the driver door open.

Obstructions

If something has blocked the driver seat while recalling a memory position, the recall may stop. Remove the obstruction. Then do one of the following:

.If automatically or manually recalling the stored memory position, press and hold the appropriate manual control for two seconds. Try recalling again by pressing the appropriate memory button. If automatically recalling the position, try recalling again by opening the driver door and pressing K on the RKE transmitter.

.If recalling the exit position, press and hold the appropriate manual control for the exit feature not recalling for

two seconds. Then try recalling the exit position again.