Black plate (33,1)
Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-7707485) -
2015 - CRC - 10/31/14

Driving and Operating 9-33

If the TractionControl/Electronic
Stability Control system begins to
limit wheel spin while using cruise
control, the cruise control
automatically disengages. See
TractionControl/Electronic Stability
Control on page 9-29. If a collision
alert occurs when cruise control is
activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System on page 9-50.
When road conditions allow the
cruise control to be safely used,
cruise control can be turned
back on.
If the brakes are applied, cruise
control disengages.
J(On/Off): Press to turn the
system on and off. Awhite indicator
appears in the instrument cluster
when cruise is turned on.
+RES (Resume/Accelerate): If
there is a set speed in memory,
press the control up briefly to
resume to that speed or press and
hold to accelerate. If the cruise
control is already active, use to
increase vehicle speed. Toincrease
speed by 1km/h (1 mph), press
+RES up to the first detent. To
increase speed to the next 5km/h
(5mph) markon the speedometer,
press +RES up to the second
detent.
SET(Set/Coast): Press the
control down briefly to set the speed
and activate cruise control. If the
cruise control is already active, use
to decrease vehicle speed. To
decrease speed by 1km/h (1 mph),
press SETdown to the first detent.
Todecrease speed to the next
5km/h (5mph) mark on the
speedometer,press SETdown to
the second detent.
*(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If the Jbutton is on when not in
use, SETor +RES could get
pressed and go into cruise when not
desired. Keep the Jbutton off
when cruise is not being used.
1. Press J.
2. Get up to the desired speed.