6-2 Lighting

In Canada, the headlamps will automatically reactivate when the vehicle is shifted out of P (Park).

AUTO (Automatic): Automatically turns the exterior lamps on and off, depending on outside lighting.

;(Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps.

2 (Headlamps): Turns on the headlamps together with the parking lamps and instrument panel lights.

IntelliBeam® System

If equipped, this system turns the vehicle's high-beam headlamps on and off according to surrounding traffic conditions.

The system turns the high-beam headlamps on when it is dark enough and there is no other traffic present.

This light comes on in the instrument cluster when the IntelliBeam system is enabled.

Turning On and Enabling IntelliBeam

To enable the IntelliBeam system, with the turn signal lever in the neutral position, turn the exterior lamp control to AUTO. The blue high-beam on light appears on the instrument cluster when the high beams are on.

Driving with IntelliBeam

The system only activates the high beams when driving over 40 km/h (25 mph).

There is a sensor near the top center of the windshield that automatically controls the system. Keep this area of the windshield clear of debris to allow for best system performance.

The high-beam headlamps remain on, under the automatic control, until one of the following situations occurs:

.The system detects an approaching vehicle's headlamps.

.The system detects a preceding vehicle's taillamps.

.The outside light is bright enough that high-beam headlamps are not required.

.The vehicle's speed drops below 20 km/h (12 mph).

Page 179
Image 179
Cadillac 2015 - CRC manual IntelliBeam System, Turning On and Enabling IntelliBeam, Driving with IntelliBeam