Cadillac 2015 - CRC manual Storing Memory Positions, Manually Recalling Memory Positions

Seats and Restraints 3-9

Storing Memory Positions

To save positions to the “1” and “2” buttons:

1.Adjust the driver or passenger seat to the desired position.

If storing a driver position, also adjust the outside mirrors and the power tilt and telescoping steering column and massage intensity (if equipped).

2.Press and release SET. A beep will sound.

3.Immediately press and hold “1” until two beeps sound.

4.Repeat Steps 1 and 2 for a second driver using “2.”

To save positions to the B (Exit) button and easy exit features:

1.Adjust the driver or passenger seat to the desired position for getting out of the vehicle.

If storing a driver exit position, also adjust the power tilt and telescoping steering column and the outside mirrors on some vehicles.

2.Press and release SET. A beep will sound.

3.Immediately press and hold B until two beeps sound.

Manually Recalling Memory Positions

If the vehicle is OFF or not in

P (Park), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing

"1,” "2," or B before the stored positions are reached stops the recall.

If the vehicle is ON and in P (Park), press and release “1,” “2,” or B to manually recall the previously stored memory positions. Placing the ignition in OFF/LOCK before the stored positions are reached stops the recall.

If the massage feature is off when the memory recall is performed, the previously stored type and intensity will be recalled, but it will remain off until activated with the On/Off control.

Automatically Recalling Memory

Positions (Auto Memory Recall)

(Driver Only)

The Auto (Automatic) Memory Recall feature automatically recalls the current driver’s previously stored “1” or “2” position when entering the vehicle.

Depending upon the Auto Memory Recall feature enabled in the vehicle personalization menu, memory “1” or “2” positions are recalled in the following ways:

To activate the recall when On - Driver Door Open is selected in the personalization menu, do one of the following:

.Press K on the RKE transmitter and open the driver door.