Chapter 7 Sending Faxes 7-23
Sending Faxes
10 Use the numeric buttons to enter the ID code
(max. 20 digits, no pauses necessary).
• This ID code is given to you by Cable and
Wireless Communications Limited (or another
alternative service).
• If an ID code is already registered, you will see a
string of asterisks (AAAAA) in the LCD.
11 Press Set.
12 Press Stop to return to standby mode.
Sending With an Alternative Telephone NetworkFollow this procedure to send using a registered long distance service:
1Open the document tray (MultiPASS models
only).
2Adjust the document feed lever for the
document you are loading. (→ p. 4-2)
3Prepare the document and load it, face down,
in the ADF. (→ p. 4-4)
• For colour sending, press Colour/B&W (Color/
B&W) to turn on its light. (→ p. 7-3)
• To adjust the resolution and contrast, → pp. 7-4,
7-5.
• You may be unable to use memory sending if the
percentage shown in the LCD is close to 100%.
Use manual sending via the handset instead.
(→ p. 7-8)
4Press Function.
5Press M.
6Use the numeric buttons to dial the other
party’s fax number.
• If you enter the wrong number, press Stop, then
start again from step 4.
Ex: 123456789
REPORT SETTINGS
15:00 FaxOnly
Ex:
MEMORY USED 0%
TEL= M
TEL= M416795111
Ex:
Ex:
(Currently used memory)
(Standby to scan)
DOCUMENT READY