Chapter 2 Setting Up 2-3
Setting Up

Removing Shipping Materials

Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
MultiPASS C75/FAX-B215C
1Remove the shipping
tapes from the top of
the unit.
2Remove the protective
piece from the multi-
purpose tray.
6Open the operation panel partially
by gently pulling it towards you (it
only opens slightly). Then remove
the protective sheet from the ADF.
Close the operation panel by
pressing it down from the centre
until it locks into place.
5Open the document tray (MultiPASS
model only), then remove the protective
sheet and shipping tapes.
nThe actual shipping materials may differ in shape, quantity, and position from the ones shown
above.
3Remove the shipping
tape and protective
piece from the bottom
of the unit.
4Remove the shipping
tape and protective
piece from the output
tray.
7Open the printer cover, then remove the
shipping tape from the side of the unit.
Close the printer cover and document tray.