Chapter 8 Receiving Faxes 8-7
Receiving Faxes
Follow this procedure to set the Fax/Tel Mode options:
1Follow steps 1 to 9 on page 8-5.
2Press Set.
3Use the numeric buttons to enter the time the
unit waits before ringing when it receives a
call.
You can select from 0 to 30 seconds.
The default setting is eight seconds.
4Press Set twice.
5Use the numeric buttons to enter the time the
unit rings while waiting for someone to pick up
the handset.
You can select from 10 to 60 seconds.
The default setting is 22 seconds.
6Press Set twice.
7Use d or u to select RECEIVE or
DISCONNECT.
This setting tells the unit what to do if no one picks
up the handset within the specified ring time set in
step 5.
Select RECEIVE to receive the call, or
DISCONNECT to disconnect the call.
The default setting is RECEIVE.
8Press Set.
9Press Stop to return to standby mode.
Ex:
Ex:
Ex:
Ex:
Ex:
Ex:
Ex:
RING START TIME
8SEC
9SEC
F/T RING TIME
22SEC
30SEC
DEFAULT ACTION
RECEIVE
DISCONNECT
INCOMING RING
15:00 FaxTel