12-14 Maintenance Chapter 12
6Remove the new BJ cartridge from its
package, then remove the orange protective
cap q and tape w.
Discard the cap and tape. Never attempt to
reattach them to the BJ cartridge print head.
Install the BJ cartridge immediately after removing
the cap and tape.
Spilled ink can stain any surface; protect yourself
and your work area.
7With the label facing outwards, insert the BJ
cartridge into the cartridge holder. Lower the
blue cartridge lock lever until it locks into
position.
8Press C.
The cartridge holder moves to its home position
on the right side of the unit and begins cleaning
the BJ cartridge print head. This process takes
about 55 seconds.
cDo not try to manually move or stop the
cartridge holder since this may damage
the unit.
1
2
Do not touch these
precision
components.
9Close the printer cover.
10 Close the document tray (MultiPASS models
only).
nIf you need to unplug the unit, wait until it is in standby mode (time and receive mode displayed in
the LCD). Otherwise the cartridge holder may not be in its home position causing the BJ cartridge
to remain uncapped and dry out.