Appendix B Options B-3
Options
Attaching the Handset to Your Unit
Follow this procedure to attach the optional handset to your unit:
1Use two of the screws provided to attach the
handset cradle to the cradle support.
Push the screws in with your finger or use a cross-
point screwdriver. Make sure the screws are
inserted all the way in.
2Before attaching the cradle support to your
unit, remove the BJ cartridge.
To remove the cartridge follow steps 1 to 5 on
pages 12-12 and 12-13.
Store the BJ cartridge in the BJ cartr idge
container provided with your unit.
3Disconnect the power cord from your unit.
4Turn the unit on its side and while supporting
it, use a screwdriver to remove the two covers
on the bottom of the unit.
5Support the unit and use the remaining two
screws provided to attach the cradle support
to the unit.
Push the screws in with your finger or use a cross-
point screwdriver. Make sure the screws are
inserted all the way in.
Make sure you support the unit when inserting the
screws.